Welcome to Matt's Classic Bowties

Speed Tech Performance offers the PRO TOURING suspension kit for the Ultimate Pro Touring Suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the QA1 shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you. 

The kit includes the following;

1. Speed Tech Performance Tubular Upper control arms with Stainless Steel Cross Shafts.

2. Speed Tech Performance Tubular Lower Control Arms.

3. QA1 GMP coil over kit for either small or big block motors. 

4. Speed Tech Tie Rod Sleeves

This PRO TOURING kit is the ultimate choice to improving the handling of your ride.

Speed Tech Performance offers the ROAD ASSAULT suspension kit for the Ultimate road/track suspension setup. This combination will greatly improve the handling of your ride with the added feature for fine tuning your ride height and your bounce and rebound with the QA1 shocks. This kit is the best choice for the true performance minded that wants their car to handle superbly but yet still be enjoyable to drive. If you want to greatly improve the handling of your ride and insure that you have the ultimate suspension setup for a conventional spring coil combination under the most extreme driving conditions at still an reasonable price, then this kit is for you. 

The kit includes the following;

1. Speed Tech Performance Tubular Upper control arms with Stainless Steel Cross Shafts.

2. Speed Tech Performance Tubular Lower Control Arms.

3. QA1 GMP coil over kit for either small or big block motors.

4. 1 5/16" tubular, chrome moly, heat treated, powder coated, front sway bar including hardware

5. Speed tech tie rod sleeves.

This ROAD ASSAULT kit is the ultimate choice to improving the handling of your ride

The Speed Tech First Gen 67-69 Camaro Subframe, is a direct replacement for your old worn out subframe. Offering the benifits of Power Rack and Pinion Steering, Sway Bar, Built in Guildstrand Mod, and Coil Over Shocks. 
This Subframe accepts Small and Big Blocks, using the stock Oil Pan, and will accept the LSx series with an aftermarket oil pan and motor mount adapters. Also Partnering with Stainless Works, we have built headers that will clear a 2 joint, single shaft steering kit for all three engine combinations as an option.

FITMENT:

1967-1969 Camaro / Firebird

The kit includes the following;

Front:

High Clearance Upper and Lower Control Arms
Solid, Heat Treated, Powder Coated, Chromoly Sway Bar
Billet Aluminum Upper Shock Mounts
QA1 Single Adjustable Coil Over Shocks and Springs
Power Rack and Pinion with Steering Arms
Adjustable Motor Mounts
Adjustable Transmission Mount

All Grade 8 Hardware

Rear

Upper Rear Suspension Cross Member
Adjustable Torque Arm with Delrin Bushings
Articu-Link Trailing Arms with Delrin Bushings
Rear Coil Over Cross Member
Single Adjustable QA1 Coil Overs
Adjustable Pan Hard Bar
All Grade 8 Hardware

Rear End

Complete rear end including: 

Strange 9" Rear Housing with Suspension Brackets Welded on. Your Choice of Width
US Gear Posi. Your Choice of Gears
31 Spline Pro Street Axles

Features:

Front:

• High Clearence Control Arms have been tested tofit up to a 10" 295 wheel/tire with a 7" backspace
• A True Coil Over Combination
• Available Bolt in Air Ride Shock Wave 3.0 (SKW1000)
• Direct Bolt on any factory replacement tubular control arms that worked with your original frame
• Extra Adjustments built into your frame to fine tune your suspension
• Fully adjustable transmission cross member fits all GM Transmissions also T56 and TKO
• Power Rack and Pinion Steering
• Strong Box Construction, Laser cut and Jig Welded
• Reduced weight, sub frame weight only 125lb
• Factory alignment hole to ease in the installation and alignment of the sub frame
• Built in tow/ tie down hook mounts, no more wrapping tie downs around your painted frame
• Increased header and exhaust clearance
• Can reuse your existing sway bar if you are reusing your aftermarket control arms
• Fits Small and Big Blocks with original oil pan
• Fits LSx engines with aftermarket oil pan and motor mounts (available)
• Articu-link lower control arms with Delrin bushings eliminates any suspension bind

Rear:

• Fits both 9” and 12 bolt differentials
• Uses QA1 coil over shocks
• Adjustable roll center pan hard bar
• Adjustable ride height
• Adjustable pinion angle
• Adjustable instant center location
• Adjustable wheel base
• Compliments Speed tech front sub fram
• Available with complete rear end with all brackets installed or in kit form
• Will accept Air Ride shocks
• Will accept 345 tires on a 20” rim

 Rear End:

• Strange 9" Rear Housing with Brackets Welded on. Your Choice of Width
• US Gear Posi. Your Choice of Gears
• 31 Spline Pro Street Axles

Truck Freight Item - EMAIL OR CALL FOR QUOTE