Brand new Tubular Steel Upper and lower FRONT control arms LH and RH!
Fits: 67-69 Camaro and Firebird's... Powder coated SILVER! 100% made in the USA!!FRONT ARMS INCLUDE:
$749 buys you all 4 pieces. The arms are preassembled with new ball Joints and plated Billet cross shafts! They will Improve suspension geometry and reduce unsprung weight.
These Tubular Control Arms are designed to provide full wheel travel and minimal friction. The upper control arms are made from 1-1/4 x .120 wall D.O.M. tubing and the pivot barrels are thick 1-1/2 x .188 wall D.O.M. tubing to eliminate distortion. The upper control arms add 5 degrees of caster. The lower arms are 1 1/2 x .120 wall D.O.M tubing and they provide increased ground clearance and allow the use of sway bars and factory style spindles (uses factory type ball joints) The bushings are made from self lubricating non-squeak patented plastic that will out last any rubber or urethane, and works at temperatures in excess of 400 degrees F and requires ZERO lube. Comes powder coated gloss silver.
The Chrome-moly cross shafts and sleeves are zinc plated for lasting performance. The sleeves have an interlocking design that prevents the hardware from ever working loose. The pivots carry both forward and back loads (the original cross shaft pivot was designed to only carry a forward or back load, but not both). The control arm assemblies are a simple bolt-in installation with no modification required. They work with all factory and replacement spindles and with or without O.E. bump stops. Includes ball Joints.
These arms are hard to keep in stock and we usually sell more than we can make so get your order in NOW!!!! Please call first or Email to check current stock status if shipping time is a concern!
