These Items are designed to replace 69 F-Body or A-Body Factory Style Disc Brakes. These are Outright Prices. If you need a full conversion with upgrades please see our other sections.
Recommended upgrade to your front disc brake kit! These lines will offer a lifetime of rot free service. They are stiffer and don't Balloon or flex like rubber lines do. They will creat a stiffer pedal increasing braking performance and feel! This is an Upgrade only price and includes both lines for the front and the hardware!
Brand new pair of Powdercoated Reproduction Calipers loaded with Pads!
Upgrade both Calipers to show quality Powder Coat Finish. Standard calipers come in a raw finish that will rust. This is a great alternative to spray paint which will flake off and fade.
Colors avialable: Black, Red, or Grey.
Please specify which color you want when purchasing this item.
Brand new Pair of Reproduction Drilled Slotted and Zic Washed Rotors! Includes Pre-Installed Bearing Races!
This upgrade will improve the performance of your brake system and the looks of the car! The cross drilling will help get cool air to the pads and rotor surface, the slotting will help to expel gases between the pad and rotor as well as keep the pads free of road debris pickud up while driving. The ZINC wash is a coating etched into the rotor to prevent rust everywhere the pads don't touch! It is ecpically important when upgrading to drill/slot because those holes and slot could build rust unless coated!
(Shown with Optional Powder Coated Calipers)
This is a complete front to rear and both front wheels up to your new proportioning valve set. This kit will replace your old rusty/corroded hardlines and the front to rear line is a 2 piece to make installation MUCH easier! Under the hood this kit will make it look like a factory professional install! This is a HIGHLY recommended upgrade for your disc brake kit. Made from original OEM style steel!
This is a complete stainless steel front to rear and both front wheels up to your new proportioning valve set. This kit will replace your old rusty/corroded hardlines and the front to rear line is a 2 piece to make installation MUCH easier! Under the hood this kit will make it look like a factory professional install! This is a HIGHLY recommended upgrade for your disc brake kit.
Fits:
67 68 or 69 Camaro/Firebird....
64 65 66 67 68 69 70 71 72 Chevelle/El Camino/GTO/Lemans/Cutlass/Monte Carlo/A-Body
68-74 Nova/X-Body
Brand new on the market. 2" Drop spindles for factory style disc brakes!!
Uses your original steering arms and allows for a 4.5" backspace wheel. The "Other" drop spindles with built in steering arms for the 10.5" rotors only allows for 3.5" backspace!
Yes, these spindles will DIRECTLY replace your factory stock height spindles and lower your car EXACTLY 2" without affecting suspension geometry. They use factory style BALL JOINTS! Just a few hours of work and your car is dropped 2"
Uses Factory style Rotors, calipers, bearing, seals, caliper brackets, Ball Joints, ect.
BRAND NEW Pair of Forged Steering Arms for your 1967 1968 and 1969 Camaro / Firebird or 68-74 Nova / X-Body. Works with factory 5 Lug Spindles. This is to replace missing or damaged steering arms. They are a direct replacement of your original GM Steering Arms. They are Forged not Cast!
