1964 - 1972 Chevrolet Chevelle, Monte Carlo, Malibu, El Camino
1964 - 1972 Buick Skylark, Grand Sport, Special
1964 - 1972 Pontiac Lemans, GTO
1964 - 1972 Oldsmobile Cutlass, 442, F-85
Reposition your instant center by changing your lower control arm angle for improved traction. After product installed, you will see a great increase in traction by lowering the rearward angle of the lower control arm, allowing more force to be placed on the rear tires. Relocation brackets have two settings to allow the lower control arm to be lowered either 2" or 3", depending on your preference. Settings are placed in a correct pattern that will allow use of all OEM control arms or any aftermarket control arms (brackets do not require a longer control arm). Brackets installed can provide a 0.10 or better 60-foot reduction and an increase in track consistency. Brackets are constructed of 0.188" mild steel and CNC machined for precision tolerances. Relocation brackets will work with both 10-Bolt and 12-Bolt rear ends.
Brackets are Weld-in only and install in approximately 1 hour. All hardware and detailed installation instructions are included with each kit.