Show Prep - HYDRATECH Hydraulic Brake Assist Unit

    Delivery time:5-7 days
Add to cart
  • Description
  • More

Made in the USA!

100% BRAND NEW D.O.T. APPROVED

BOSCH HYDRO-BOOST FULLY TESTED

1 YEAR WARRANTY!

Specifics:

CNC Machined T6 billet aluminum direct fit firewall mounting plate design

Compatible with rack and pinion conversions

For use with disc / drum or disc / disc brakes
(not for use with 4 wheel drum brakes)

Features an adjustable brake pedal rod to allow for a range of brake pedal height adjustment
(always adjust the Rod to your Free Hanging Pedal, to avoid Pre-Load)

Optional Power Steering line set will include overlength hoses with re-usable / re-buildable hose ends
(See information above on adding Power Steering Line set)

7 1/4" installed length from firewall to MC mounting flange - no firewall modifications required

MOST UNITS IN STOCK! These are normally built when ordered. Please contact us to confirm stock status or lead time.

FULL SPECIAL SHOW PREPARATION ADDS THE FOLLOWING PREPARATION TO THE BASE MODEL ABOVE:

SMOOTH ALL CASTING PARTING LINES EXPERTLY WITH CARBIDE CUTTERS

GRIND SMOOTH ALL OE CASTING FLASH AND INCONSISTENCIES

PLUG AND METAL FINISH CAST IN OE DRAIN HOLE

RETAP BRAKE UNIT CASE BOLT HOLES FOR UPSCALE FASTENERS

INSTALL REPLACEMENT HIGH STRENGTH SHOW CHROMED BOLTS

RECLOCK OE ACCUMULATOR FOR BEST INSTALLED APPEARANCE

MACHINE FINISH OE ACCUMULATOR FOR SHOW FINISH

FILL CASTING INCONSISTENCIES FOR PROPER CONTOUR AND FINISH

APPLY ONE PRECISION BASE COAT OF DUPONT NASON GLOSS BLACK

SAND SMOOTH ENTIRE BRAKE UNIT CASTING

APPLY ONE FURTHER COAT OF DUPONT NASON GLOSS BLACK

FINISH SAND ENTIRE BRAKE UNIT CASTING

APPLY PRECISION FINISH COAT OF DUPONT NASON GLOSS BLACK

DOUBLE CLEAR COAT ALL BARE MACHINED SURFACES

OVEN BAKE THE BRAKE UNIT FOR DURABLE FINISH

DOUBLE CLEAR COAT AND OVEN BAKE BILLET FIREWALL MOUNTING PLATE

PERFORM METICULOUS ASSEMBLY OF SHOW PREPARED BRAKE UNIT

REPLACE OE MC MOUNTING STUDS WITH UPSCALE CHROMED FASTENERS

INSTALL SPECIAL 90 DEGREE LOW PRESSURE HOSE NIPPLE

MACHINE ASSEMBLY TOOL MARKS OUT OF ABOVE NIPPLE ASSEMBLY

CLEAR COAT SPECIAL 90 DEGREE LOW PRESSURE NIPPLE ASSEMBLY

PERFORM FINAL EXAMINATION OF BRAKE UNIT FOR FULL SHOW QUALITY

True BRAND NEW BOSCH unit by Hydratech, we don't trust anyone elses! These are the first and the best bolt-in kit's on the market. This unit will provide nearly 2000psi of output, compared to about 1100psi from an 11" booster, the biggest that was made! This is the smallest sized booster available, it takes up hardly any more room than a master cylinder! These units are the only choice for most top builders, LSx swap builds, big brake systems, and those who just want the BEST possible braking assist! These same units are used on 1 ton trucks, and even larger trucks, they will do the job on your muscle car!

Installation is very straight forward. The unit bolts up just like a standard power booster and connects to the pedal with the included hardware just like a standard booster. Any GM style master will bolt up as well (Stock, Wilwood, Baer, ect) The optional line set will give you the fittings to "Tee" into your existing power steering system and you are finished! As our customers say, once you run one of these units, you will never look back, every build from then on will get one, they are that nice!

Highlights:

  • PROVIDES ALL THE PERFORMANCE AT A LOWER COST
  • 100% ALL BRAND NEW HIGH END QUALITY COMPONENTS
  • HIGHLY ENGINEERED FOR PROPER FIT, FUNCTION, AND OPERATIONS
  • EXTENSIVELY TESTED DIRECT FIT MODELS WITH LONG PROVEN HISTORY
  • GENUINE HYDRATECH CNC MACHINED T6061 BILLET MOUNTING PLATES
  • BRAND NEW 2015 BOSCH PRODUCTION BRAKE ASSIST UNITS
  • BRAKE UNIT CASTINGS POWDER COATED INDUSTRIAL BLACK
  • FACTORY DYNO TESTED FOR PRECISE OPERATIONS
  • TRUE BOLT IN DESIGNS USING COMMON HAND TOOLS
  • AN-6 ADAPTERS INSTALLED IN HIGH PRESSURE PORTS
  • SPECIAL 90 DEGREE LOW PROFILE RETURN LINE NIPPLE
  • GENUINE AEROQUIP BRAIDED STAINLESS TFE LINE SETS
  • GENUINE AEROQUIP RE-USABLE / REBUILDABLE HOSE ENDS
  • WIDEST RANGE OF FITTINGS AND ADAPTERS INCLUDED
  • ALL SMALL PARTS REQUIRED FOR INSTALLATION INCLUDED
  • CLEAR STEP BY STEP EASY TO READ INSTALLATION INSTRUCTIONS 
  • FULL HIGH QUALITY SALES AND TECH SUPPORT BY PHONE AND E-MAIL
  • ONE YEAR LIMITED WARRANTY AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP
  • THIS IS A HIGHLY DETAILED ITEM THAT VASTLY EXCEEDS EXPECTATIONS  
  • CHEAP COPIES OF OUR SYSTEMS ON THE MARKET JUST DO NOT COMPARE

Line kits are available as well in 4' or 6'. The line sets include all necessary fittings to "Tee" into your existing Power  Steering line/Pump system and a Braided hose for the high pressure side and black rubber hose for the low pressure side.  

FULL SPECIAL SHOW PREPARATION
ADDS THE FOLLOWING PREPARATION TO THE BASE MODEL ABOVE:
SMOOTH ALL CASTING PARTING LINES EXPERTLY WITH CARBIDE CUTTERS

GRIND SMOOTH ALL OE CASTING FLASH AND INCONSISTENCIES

PLUG AND METAL FINISH CAST IN OE DRAIN HOLE

RETAP BRAKE UNIT CASE BOLT HOLES FOR UPSCALE FASTENERS

INSTALL REPLACEMENT HIGH STRENGTH SHOW CHROMED BOLTS

RECLOCK OE ACCUMULATOR FOR BEST INSTALLED APPEARANCE

MACHINE FINISH OE ACCUMULATOR FOR SHOW FINISH

FILL CASTING INCONSISTENCIES FOR PROPER CONTOUR AND FINISH

APPLY ONE PRECISION BASE COAT OF DUPONT NASON GLOSS BLACK

SAND SMOOTH ENTIRE BRAKE UNIT CASTING

APPLY ONE FURTHER COAT OF DUPONT NASON GLOSS BLACK

FINISH SAND ENTIRE BRAKE UNIT CASTING

APPLY PRECISION FINISH COAT OF DUPONT NASON GLOSS BLACK

DOUBLE CLEAR COAT ALL BARE MACHINED SURFACES

OVEN BAKE THE BRAKE UNIT FOR DURABLE FINISH

DOUBLE CLEAR COAT AND OVEN BAKE BILLET FIREWALL MOUNTING PLATE

PERFORM METICULOUS ASSEMBLY OF SHOW PREPARED BRAKE UNIT

REPLACE OE MC MOUNTING STUDS WITH UPSCALE CHROMED FASTENERS

INSTALL SPECIAL 90 DEGREE LOW PRESSURE HOSE NIPPLE

MACHINE ASSEMBLY TOOL MARKS OUT OF ABOVE NIPPLE ASSEMBLY

CLEAR COAT SPECIAL 90 DEGREE LOW PRESSURE NIPPLE ASSEMBLY

PERFORM FINAL EXAMINATION OF BRAKE UNIT FOR FULL SHOW QUALITY

!