YEAR AND CAR SPECIFIC.
Made to fit.
SOLD AS A PAIR
Each rear set comes with driver and passenger side seat belts, two stainless steel brackets, two female ends with your choice of buckle style, Grade 8 bolts, and all other necessary installation hardware and instructions.
Each pair of rear 3-point seat belts will bolt into the existing holes of your 1968-73 Chevelle's structure - in the quarter panel/trunk area and under the rear shelf panel. The rear brackets will go around the speakers under the shelf without interference. The belts are sewn according to the vehicle manufacturer's pattern to increase their strength, and come in all of the colors shown in the color grid picture.
Our seat belts are pull-tested to 3,000 pounds of force weekly to ensure their quality and compliance with the Federal Motor Vehicle Safety Standards (FMVSS). However, our seat belts exceed this 3,000 pound standard by more than 20%.
The bracket in the main picture is for a specific car and year, and is used to represent all GM Rear 3-point seat belts on our site. The brackets you receive may look slightly different to fit the floorpan of your specific car and year.
If you choose the standard reels, they retract and lock up like modern car seat belts. However, if you choose ratcheting reels, they will ratchet back once pulled all the way out and will not loosen until the seat belt is fully retracted again. These are a premium option, and are perfect for car seats!